Neumann TLM 67

Large-diaphragm Multipattern Condenser Microphone

Large-diaphragm Condenser Microphone with 20Hz-20kHz Frequency Response, Variable Polar Patterns, K 67 Capsule, Shockmount, and Transformerless Design



In the world of studio microphones, the numbers “47”, “67” and “87” have associations that inspire enthusiasm among professionals in the field. It is of course no coincidence that the name of the new Neumann TLM 67 contains the number “67”. In many respects, the Neumann TLM 67 is based on the “workhorse” of the 1960s, the legendary U 67. Like the U 67, the TLM 67 incorporates the K 67 capsule. In addition, the special new circuit design closely reproduces the sound characteristics of the classic U 67, without the use of tubes. Similar Neumann circuit technology has already proved very successful in the TLM 49.

The Neumann TLM 67 is extremely versatile. Its three switchable directional characteristics (omnidirectional, cardioid and figure-8), selectable 10 dB pre-attenuation and high-pass filter permit detailed adjustments to be made, depending upon the specific recording situation.

اطلاعات بیشتر

نوع میکروفون




الگوی قطبی

Cardioid, Omni, Figure-8

پاسخگویی فرکانسی


نهایت Peak SPL

105dB (Cardioid), 110dB (Omni), 111dB (Figure-8)


50 ohms

نسبت سیگنال به نویز

83dB (Cardioid), 78dB (Omni), 77dB (Figure-8)

سلف نویز

11dB (Cardioid), 16dB (Omni), 17dB (Figure-8)

فیلتر حذف فرکانس های پایین


پد ها




تغذیه برق

48V phantom power

لوازم جانبی موجود

Shock Mount, Wood Box


– Sound characteristics based on the legendary U 67
– Three switchable directional characteristics (omnidirectional, cardioid and figure-8)
– Switchable highpass filter and pre-attenuation
– Directional pattern: Omni/cardioid/figure-8
– Frequency range: 20Hz – 20kHz
– Sensitivity at 1kHz into 1 kohm: 10/18/9 mV/Pa
– Rated impedance: 50 ohms
– Rated load impedance: 1 kohms
– Equivalent noise level, CCIR1) 29/24/30dB
– Equivalent noise level, A-weighted1) 16/11/17dB-A
– Maximum output voltage: -1 dBu
– Includes E87 Shockmount
– Requires +48V phantom power